High Temperature 30 Bank Shear Tester

SS-HT-30

The High Temperature 30 Bank Shear Tester performs the same tests listed below, plus shear tests in ovens, humidity chambers or freezers. It was designed to perform tests according to PSTC-7 Procedure C and ASTM D 3654 Procedure C.

• Rugged construction, capable of withstanding the abuse of the production environment
• Compact and easy to use
• Two component design allows the switch unit to be separated from the timer control box
• High temperature, 8' long (2.5m), cable interfaces the two components
• Easy-to-read, 0.5" (1 cm) LCD timer display is set to time in increments of 1/10 of a minute
• Designed to use standard, 2" x 3" (50mm x 75mm) format, test panels
• Capable of holding panels of various thicknesses, up to 1/4" (6mm)
• Mechanical switches can be calibrated to trip when using weights from 100 to 1,000 grams
• Adjustable feet allow the user to level the testing plane
• Panel rack is marked for the standard 178° back tilt, as specified by most shear test methods
• Adjustable angle panel rack allows the user to easily change the test angle from 178° to 90°
• Shear stand operating temperature range 20° - 400° F (-6° - 204° C)
• Timer box operating temperature range 32° - 150° F (0° - 70° C)
• Timer box has universal input voltage from 85-265 VAC (50/60 Hz)
• Shears are designed to be used with weights from 100gr to 1000gr
• Any weight which is larger than the 1000gr requires the S-EXT(Shear Extension) accessory
• The largest weight that can be safely used with the shear stand is 3000gr
• Contact us to inquire about the usage of larger than 3000gr weights

Essential

• Test panel - 2" x 3" (50mm x 75mm)
• Steel test weight with hook - 500 or 1000 gram capacity
• Shear test clip
  (above items are all included in our accessory package - STA-500 or STA-1000)
  
  

Non-Essential

• EZ-Shear
• Thermocouple
• Shear extension plate
• Thick panel clamp
• Custom sized shear test clips
• Various test weights
• Various test panel sizes and materials
• Custom sized hand rollers
• Various sized specimen tape cutters
• Test panel holder

Switch Unit

• Height:              22" (56 cm)            
• Width:              38" (96 cm)            
• Depth:              13" (33 cm)            
• Weight:             90 lbs (41 Kg)      
      

Timer Unit

• Height:             3" (23 cm)
• Width:              11" (96 cm)
• Depth:              8" (46 cm)
• Weight:            3 lbs (27 Kg)

Some of the more popular test methods that this device is capable of performing.

•  PSTC: 107G, 53
• ASTM: D 3654A, C, D 6463A
• TLMI: 7
• FINAT: FTM-8