Signal converter Transmitter
VM-90D series
Features |
- High performance with low cost
- Compact size, DIN rail can be attached.
- Vibration measurement with selection of measuring mode and range Acc. / Vel / H function / H functionCF (only VM-90DA) Vel/Disp (VM-90DV/DVL)
- Sufficient basic function
1-step alarm output 4～20mADC level output ±5VAC monitor output Level indication
|
Pickup selection |
| For Bearing deterioration |
|
Accelerometer (Pre-amplifier is built-in)
VP-A51IW, VP-A4345I |
| For velocity.dieplacement detection lower than 1kHz |
|
Electro-dynamic velocity pickup
Middle band type VP-90VC, VP-90VD |
| For velocity.dieplacement detection lower than 10Hz |
|
Electro-dynamic velocity pickup
Low band type VP-91VC, VP-91VD (Horizontal only),VP-92VC, VP-92VD (vertical only) |
|
|
|
Item |
Specifications |
Signal output |
Converted Output |
4-20mADC、1-outpu（t output response characteristic 3sec） |
Monitor output |
±5VAC FS±5%
1-5VDC FS±5% （option） |
Alarm output |
Alarm Contact |
１-step, 1a contact
125VAC－0.5A、 30VDC－1A （at resistance load） |
Alarm Setting Range |
Any setting of 0～100% for full scale range (1% step） *1 |
Alarm Operation |
Operation at over preset level (automatic reset)
Alarm delay time initial setting 5sec (3～99sec: 1sec step) |
Display Function |
Panel Indicator |
Red 7-segment LED (4-digit display) |
| Vibration level |
5-step switch-over display by mode setting Flickers at 120% of range full scale |
| Alarm Setting (%) |
1～100 % to FS |
| Pickup Sensitivity(%) |
80～120 % to reference sensitivity |
Ambient Condition |
Temp. Range |
-5～55℃ |
Humid. Range |
30～90%RH（Not due condensation） |
Power Supply |
100VAC±10% 50/60Hz±2Hz |
Other |
Mounting |
Wall or mounting with DIN rail (DIN rail contact attachable) |
Terminal board |
M3.5 screw on rear panel |
Case Material |
Resin |
Dimensions |
W50×H80×D127mm |
Weight |
300g approx. |
VM-90DA VP-A51IW, VP-A4345I
|
Item |
Specifications |
Acceleration * |
Measuring range |
10,20,50,100,200（m/s 2 rms） |
Frequency range |
10～ 4kHz±1dB
10～10kHz ＋1dB, －3dB |
Velocity * |
Measuring range |
5,10,20,50,100（mm/s rms） |
Frequency range |
10～1,000Hz ＋1dB., －2dB |
H-function * |
Measuring range |
10,20,50,100,200（m/s 2 rms） |
Frequency range |
DC～1kHz
（Envelop detection for 2kHz～15kHz） |
H-function CF * |
Measuring range |
5,10,20,50,100 |
Frequency range |
DC～1kHz
（peak/rms in H-function） |
＊Selectable Measuring mode by MODE switch. Measurable up to range over 20%.
Error between range is within ±1％. VM-90DV VP-90VC, VP90VD
Measuring Mode |
Item |
Specifications |
| Velocity * |
Measuring range |
5,10,20,50,100（mm/s rms） |
| Frequency range |
10～1kHz ±1dB |
| Displacemen* |
Measuring range |
50,100,200,500,1000（μm p-p ） |
| Frequency range |
10～500Hz ±1dB |
＊Selectable Measuring mode by MODE switch. Measurable up to range over 20%.
Error between range is within ±1％.
VM-90DVL VP-91VC, VP-91VD, 92VC, VP-92VD
Measuring Mode |
Item |
Specifications |
Velocity * |
Measuring range |
5,10,20,50,100（mm/s rms） |
Frequency range |
5～500Hz ±1dB |
Displacemen* |
Measuring range |
50,100,200,500,1000（μm p-p ） |
Frequency range |
5～500Hz ±1dB |
＊Selectable Measuring mode by MODE switch. Measurable up to range over 20%.
Error between range is within ±1％.
|
모델명 : VM-90D series
