The Barocel Model 600 transducer is an advanced design capacitance manometer which uses patented technology to improve zero stability after temperature excursions or pressure overloads. An integral vacuum reference, of all-welded construction, contains gettering material to ensure long-term stability.
In vacuum systems, the Model 600 is the ideal replacement for McLeod, Pirani, or thermocouple gauges. Since pressure is sensed by electrically measuring pressure-induced displacement of a thin metal membrane, calibration accuracy is unaffected by the chemical composition of input media.
Dirty or corrosive gases and radioactive gases such as tritium may be monitored without affecting accuracy because the electrically active portion of the sensor is contained in the sealed reference vacuum.
The transducer's analogue output is directly proportional to pressure and may be recorded by data acquisition systems or displayed using an Edwards readout/power supply.
Wide range 4 decades
High accuracy 0.15% of reading
High resolution 0.01% full scale
Unaffected by overpressure repeats within 0.01 % full scale after being exposed to 35 psia
True total pressure reading independent of gas composition
High level DC output 0-10 volts, linear with pressure
Superior zero stability patented design eliminates errors due to temperature and overpressure effects
Stable zero reference
Alternative for McLeod, Thermocouple and Pirani Gauges
System versatility compatible with a variety of readouts and controllers
Corrosion Resistant measuring cell constructed of Inconel/Monel for high corrosion resistance.
Pressure ranges:
0-10, 0-100, 0-1000 torr 0-10, 0-1000, 0-1000 mbar Ranges to 10,000 torr also available
Overpressure effect:
Repeats within 0.01% full scale after 35 psia exposure
Accuracy:
0.15% of reading standard, 0.5% of reading also available
Material exposed to pressure media:
Inconel and Monel
Resolution:
Better then 1:10 4
Internal volume:
8.3 cm 3 including 1/2” dia. tube
Operating temperature:
0 to 65°C
Time constant:
8 msec
Temperature effect on zero:
Less than 0.005% full scale /°C
Output signal:
0-10 VDC, linear with pressure
Temperature effect on sensitivity:
Less than 0.02% reading /°C
Power requirements:
15 VDC ±5% regulated to
± l % at 30mA
Overpressure without damage:
1.25 times full scale range or 35 psia, whichever is greater
RFI suppression:
Standard on all models
Weight:
1.5 lb (0.7 kg)
Displays and Controllers for use with the model 600
모델명 : Model 600
